PS-3651A Features / Specifications

Model: PS3651A-T41 Intel? ULV Celeron? M 600MHz DDR: 256MB/512MB/1GB 12.1in. XGA (1024 x 768 dots) TFT color LCD -> Features -> Specifications

New! Battery Unit Ensures trouble-free operation even when a sudden power failure or an instantaneous low voltage condition occurs!

PS-3651A Features

PC/AT compatible panel computer Allow HDD or CF card to startup PCMCIA Type III x 1 Memory : 256/512MB/1GB Supports Windows(R)2000/Windows(R)XP AC100 to 240V power supply TFT liquid crystal (12.1in. XGA) High resolution (1024 x 768) with a touch panel Intel? ULV Celeron? M 600MHz CPU equipped. Supports touch panel mouse emulation function RAS function Replaceable Backlight Fanless Construction Aluminium die-cast body Equivalent to IP65f UL, CSA and CE marking standard Build-to-order PC/AT standard I/F (COM x 1, USB x 5, LAN x 2, RAS x 1, Speaker Out) Supported RoHS Compliant Supports the battery unit for trouble shooting a power failure

Specifications

Performance Specifications   PS3651A-T41 Supported OS Windows(R) 2000 / Windows(R) XP / Windows(R) XP Embedded (Under Development) CPU Intel? ULV Celeron? M 600MHz L2 Cache Memory 512KB (Built in the CPU) Main Memory DDR256MB/ 512MB/1GB (DIMM Socket x 1, 1GB max.) BIOS FirstBIOS Pro (Phoenix Technologies Co.) Graphics XGA (1024 × 768 dots) Video Memory 64MB max (UMA Type) Display Functions Type TFT Color LCD Resolution W1024 x H768 pixels Dot pitch W0.24mm [0.01in.] x H0.24mm [0.01in.] Effective Display Area W245.76mm [9.68in.] x H184.32mm [7.26in.] Color/Shade level 262,144 colors Backlight CFL (user replaceable) Brightness control 4 levels of adjustment Contrast Adjustment None View Angles Horizontal Direction : 120 degrees, Vertical Direction: 100 degrees(Contrast ratio: CR is 10 or greater, or TYP value) Display Service Life 50,000hrs.(at 25°C and 65%RH (humidity)) Backlight Service Life 50,000hrs. or more (at ambient temperature 25°C and continuous operation - period until backlight brightness decreases to 50% or backlight starts to flicker) Touch Panel Type Resistive Film (analog) Resolution 1024 x 1024 Service Life 1,000,000 times or more, Sweeping 100,000 times or more Interfaces Serial Interface COM1: RS-232C Corresponding to IEA-232 Connector: D-SUB 9 pin (male) (5V/RI switching available) Network Interface Ethernet 2 ports (Corresponding to IEEE802.3, 10BASE-T / 100BASE-TX automatic switching SIDE) Connector: Modular Jack (RJ-45) USB Interface Front face: USB 1.1 (Low/ Full Speed 12 Mbps) × 1 port Side face: USB 2.0 (High Speed 480 Mbps) × 4 ports Connector: USB TYPE-A RAS Interface Reset Input, Alarm Output, General Input 2ch, General Output 2ch Connector: D-SUB 9 pin (female) Speaker Output Interface Stereo Speaker output Connector: Mini Pin Jack IDE Ultra ATA100Primary Master: 2.5 inch HD slot Primary Slave: CF card slot (Type 2) PCMCIA Corresponding to CARD BUS * PCI None * Excluding VIDEO ZOOM, SOUND functions

General Specifications

PS3651A-T41 Electrical Input Voltage AC100 / 240V Rated Voltage AC85 to 265V Rated Frequency 50 / 60Hz Allowable Voltage Drop Shorter than 1 cycle (Note that pause occurrences of a sudden power failure must be more than 1 second apart) Power Consumption 95VA (50W) (max.) Voltage Endurance AC1500V 20mA for 1 minute Insulation Resistance DC500V 10MΩ (min.) Environment Surrounding Air Temperature 0°C to 50°C (HDD use: 5 to 45°C) Storage Temperature -10°C to +60°C Ambient Humidity 10%RH to 85%RH (Wet bulb temperature: 29°C max. - no condensation.) Storage Humidity 10%RH to 85%RH (Wet bulb temperature: 29°C max. - no condensation.) Dust Free of dust Pollution Degree Pollution Degree 2 Corrosive gas Free of corrosive gas Atmosphere (Using height) 800 to 1114hPa (-300 to 2000m) Vibration Resistance <When not using HDD> IEC61131-2 compliant 5Hz to 9Hz single-amplitude 3.5mm 9Hz to 150Hz constant-accelerated velocity 9.8m/s2 X, Y, Z directions 10 time (100minutes) <When using HDD> 4.9m/s2 10Hz to 25Hz X, Y, Z directions (30min. each) Noise Immunity (via noise simulator) Noise Voltage: 1,500Vp-p Pulse Duration: 50ns, 500ns, 1μs Rise Time: 1ns Electrostatic Discharge Immunity 6kV (complies with IEC61000-4-2 Level 3) Noise Immunity (Fast Transient Burst Noise) Power supply line : 2kV (IEC61000-4-4) COM port: 1kV (IEC61000-4-4) Structural Grounding Grounding resistance of 100 Ω, 2mm2 [0.0062inch2] or thicker wire, or your country's applicable standard. (Same for FG and SG terminals) Structure Rating*1: Equivalent to IP65f (Only not using Front USB) Figuration: Bult-in type Installation method: Embedding Cooling Method Natural air circulation Weight Approx. 3.8kg [8.4lb] (unit only) External Dimensions W313mm [12.32in.] × H239mm [9.41in.] × D60mm [2.36in.]

*1 The front face of the PS-A unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the PS-A unit's level of resistance is equivalent to these standards, oils that should have no effect on the PS-A can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the PS-A's front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the PS-A and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the PS-A be sure to confirm the type of conditions that will be present in the PS-A's operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly.

External Dimensions　　Units:mm[in.]

Parts Names

A: Display Displays PS-A unit screen data. B: Touch Panel Provides “mouse-less” screen control. C: Power LED / RAS Status lamp (POWER) This status LED indicates the electric conduction status and operation status. The following table shows the display colors and corresponding status.   LED PS-A Status Green (lit) Normal operation (power is ON). Green (blinking) System is NOT running (Soft OFF state). Orange (lit) System monitor error / Touch panel SELF TEST error. Orange/ Red (blinking) Backlight error. Lit off Power is OFF. D: HDD/IDE Access lamp (DISK)   LED PS-A Status Green (lit) Access to HDD or IDE. Lit off Not access to HDD or IDE. E: Front Cover When you opened it, there are a Hard Ware Reset Switch (RESET) and a USB connector (corresponding to USB Ver.1.1) inside. F: Power switch G: Power supply connector For connection, put a power plug, which is together in the package, into the power cable. H: Mask Cover I: RS-232C/485 converting unit hook holes N: Memory Slot Cover O: IDE Cover P: USB Interface (USB) This interface corresponds to USB Ver.2.0. It uses TYPE-A connector. It connects to the devices corresponding to USB. Q: PCMCIA Slot Cover R: Ethernet Interface (LAN) This interface corresponds to IEEE802.3, the Ethernet protocol (10BASE-T/100BASE-TX). It uses a modular jack connector which is RJ-45 type (Octupole). S: Speaker Output Interface It connects to the Speaker. T: RAS interface (RAS) U: Serial Interface (COM1) (R1/+5V Switching available) V: CF Card Cover

For further information, see the following PDF catalog
	Industrial Personal Computers Catalog (November 2006) PDF: 2,703KB
If you cannot open the PDF files, or do not know how to download the PDF, please click here.

- All product names used in this page are the registered trademarks of their respective companies. - The unit's photos contained in this page may differ from those of the actual unit. - All information in this page is valid in May, 2007. - All information contained in this page is subject to change without notice. Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.